Pressure Vessels

Jacketed Type Vessels

Jacketed Type Vessels is a container that is designed for controlling the temperature of its contents, by using a cooling or heating "jacket" around the vessel through which a cooling or heating fluid is circulated. A jacket is a second pressure container applied on the outside of a pressure vessel shell, to either apply cooling or heating to the vessel contents. We are able to design & manufacture customised product as per the client's specified requirements / drawings / data. All relevant documentation can be supplied i.e. Raw Material Test Certificates, Hydraulic Tests, Weld Procedures, Weld Tests, QAP etc. on request.

Vessels with Limpet Coils


Vessels with Limpet Coils construction is same as that of Jacketed Reactor except instead of a Jacket on the Shell, a Limpet Coil is welded on it. Limpet Coils can be made of Mild Steel or Stainless Steel as per the application of the user. We are able to design & manufacture customised product as per the client's specified requirements / drawings / data. All relevant documentation can be supplied i.e. Raw Material Test Certificates, Hydraulic Tests, Weld Procedures, Weld Tests, QAP etc. on request.

Reactors with / without Agitators


Reactors With / Without Agitators are widely used in the process industries. This type of vessels are used for a variety of process operations such as dissolution of solids, product mixing, chemical reactions, batch distillation, crystallization, liquid / liquid extraction and polymerization. We are able to design & manufacture customised product as per the client's specified requirements / drawings / data. All relevant documentation can be supplied i.e. Raw Material Test Certificates, Hydraulic Tests, Weld Procedures, Weld Tests, QAP etc. on request.

Air Receivers

Air Receivers is essential to every compressed air system to act as a buffer and a storage medium between the compressor and the consumption system. We are able to design & manufacture customised product as per the client's specified requirements / drawings / data. All relevant documentation can be supplied i.e. Raw Material Test Certificates, Hydraulic Tests, Weld Procedures, Weld Tests, QAP etc. on request.

Flash Vessels


In Flash Vessels flow a mixture of liquid and vapor. The goal is to separate the vapor and liquid. We are able to design & manufacture customised product as per the client's specified requirements / drawings / data. All relevant documentation can be supplied i.e. Raw Material Test Certificates, Hydraulic Tests, Weld Procedures, Weld Tests, and QAP etc. on request.

Venturi & Scrubber

Venturi scrubbers use turbulence and an absorbing liquid to create a pressure drop between the front and back of the scrubber. The scrubbers are used to take out particulate and to remove gas. We are able to design & manufacture customised product as per the client's specified requirements / drawings / data. All relevant documentation can be supplied i.e. Raw Material Test Certificates, Hydraulic Tests, Weld Procedures, Weld Tests, and QAP etc. on request.

Knock out Drum


Knock out Drum is vapor & liquid separator and is equipment used in several industrial applications to separate a vapor–liquid mixture. Knock out drums can be configured in either a horizontal or vertical arrangement. When horizontal, a knock out drum will be constructed with one gas stream inlet, and two outlets, which can then be joined with a manifold. We are able to design & manufacture customised product as per the client's specified requirements / drawings / data. All relevant documentation can be supplied i.e. Raw Material Test Certificates, Hydraulic Tests, Weld Procedures, Weld Tests, and QAP etc. on request.

Surge Tanks


In Surge Tank two flows are matched that are not identical in time but are expected to average out over the long run. They can dampen fluctuations in flow rate, composition or temperature. They can allow one unit to be shut down for maintenance without shutting down the entire plant. We are able to design & manufacture customised product as per the client's specified requirements / drawings / data. All relevant documentation can be supplied i.e. Raw Material Test Certificates, Hydraulic Tests, Weld Procedures, Weld Tests, and QAP etc. on request.

Tow Cans

Tow Cans are used for storing raw staple fiber after spinning in PSF plants (Fiber Industries). We are able to design & manufacture customised product as per the client's specified requirements / drawings / data. All relevant documentation can be supplied i.e. Raw Material Test Certificates, Hydraulic Tests, Weld Procedures, Weld Tests, and QAP etc. on request.

 

 

Contact Us

Copyright © 2013 KRYFS Manufacturers. All Rights Reserved. Compare OoMA vs Vonage Voice Quality

SEND INQUIRY